Search

Muller Motorsport

View as Grid List
Sort by
Display per page
Picture of KTM 950/990 Foam Filter

KTM 950/990 Foam Filter

Pre-Oiled or Dry Filter for our Racing Filter System Fits both 950/990 KTM bikes
€29.00 excl tax
Picture of KTM 950/990 WATER/SAND/DUST Pre-Filter

KTM 950/990 WATER/SAND/DUST Pre-Filter

€29.00 excl tax
Picture of KTM 950/990 SAS Plate

KTM 950/990 SAS Plate

pair, bare aluminum, no finish
€15.00 excl tax
Picture of Black Desert X Steering Damper Kit

Black Desert X Steering Damper Kit


Muller Motorsports is very proud to announce our steering damper kit for the incredible Ducati Desert X.


After designing and real-world testing, we are introducing a solution for replacing the ineffective original steering damper. Leveraging the proven Scotts steering stabilizer, our damper kit is based on principles of simplicity and sound engineering.


A damper mount that virtually adds zero rise (less than 2mm) and retains the original handlebar vibration damping (or you can eliminate it easily for a solid handlebar feel) and a damper pin mount that requires no modification to your Ducati.


100% reversible at any time and mere minutes to install using simple hand tools. 

€229.00 excl tax
Picture of Desert X Bar Risers Black 10mm

Desert X Bar Risers Black 10mm

Bar risers compatible with our steering damper kit for Desert X
€15.00 excl tax
Picture of Desert X Bar Risers Black 20mm

Desert X Bar Risers Black 20mm

Bar risers compatible with our steering damper kit for Desert X
€30.00 excl tax
Picture of Desert X Cam Belt Mud Protector

Desert X Cam Belt Mud Protector

  • Muller Motorsport introduces a simple and effective protection solution for the Ducati Desert X front camshaft belt cover.
  • Cam belt is still able to breathe there is a gap between the cover and our mud protector.
€25.00 excl tax
Picture of Desert X Peg Stop Brake Lever Saver

Desert X Peg Stop Brake Lever Saver

  • Muller Motorsport introduces a simple and effective protection solution for the Ducati Desert X rear brake pedal.
  • Once your DDX tips over onto the right side the footpeg collides with your brake lever, bending it and making it unusable and possibly damaging the rear brake master cylinder.
  • Made from 8mm thick Stainless Steel - guaranteed to never bend and protect forever!
  • Tighten the bolts to 40Nm and recheck your torque after the first ride
€45.00 excl tax
Picture of Desert X Steering Damper Kit

Desert X Steering Damper Kit

Muller Motorsports is very proud to announce our steering damper kit for the incredible Ducati Desert X.


After designing and real-world testing, we are introducing a solution for replacing the ineffective original steering damper. Leveraging the proven Scotts steering stabilizer, our damper kit is based on principles of simplicity and sound engineering.


A damper mount that virtually adds zero rise (less than 2mm) and retains the original handlebar vibration damping (or you can eliminate it easily for a solid handlebar feel) and a damper pin mount that requires no modification to your Ducati.


100% reversible at any time and mere minutes to install using simple hand tools. 

From €15.00 excl tax
Picture of Files for Desert X Fork Mud Guards

Files for Desert X Fork Mud Guards

€0.00 excl tax
Picture of Red Desert X Steering Damper Kit

Red Desert X Steering Damper Kit

Muller Motorsports is very proud to announce our steering damper kit for the incredible Ducati Desert X.


After designing and real-world testing, we are introducing a solution for replacing the ineffective original steering damper. Leveraging the proven Scotts steering stabilizer, our damper kit is based on principles of simplicity and sound engineering.


A damper mount that virtually adds zero rise (less than 2mm) and retains the original handlebar vibration damping (or you can eliminate it easily for a solid handlebar feel) and a damper pin mount that requires no modification to your Ducati.


100% reversible at any time and mere minutes to install using simple hand tools. 

€229.00 excl tax
Picture of Set of Desert X Fork Mud Guards

Set of Desert X Fork Mud Guards

It seems that Ducati fixed this issue on latter models of this bike, please check your fender if it already has those ears to cover forks you most likely don't need it, but we cannot be sure, as we have not been able to get our hands on the new fender.

Even if Ducati fixed this issue, our product can be an additional protection, to keep mud from your fork seals.

€25.00 excl tax
Picture of HDPE Clutch Cover For KTM690/HSQ701/GAS700

HDPE Clutch Cover For KTM690/HSQ701/GAS700

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€59.00 excl tax
Picture of HDPE Clutch Cover For KTM790/890

HDPE Clutch Cover For KTM790/890

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€59.00 excl tax
Picture of HDPE Clutch Cover For Tenere

HDPE Clutch Cover For Tenere

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€59.00 excl tax
Picture of HDPE Ignition Cover For 950/990

HDPE Ignition Cover For 950/990

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€59.00 excl tax
Picture of HDPE Ignition Cover For KTM690/HSQ701/GAS700

HDPE Ignition Cover For KTM690/HSQ701/GAS700

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€49.00 excl tax
Picture of HDPE Ignition Cover For KTM790/890

HDPE Ignition Cover For KTM790/890

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€59.00 excl tax
Picture of HDPE Ignition Cover For Tenere

HDPE Ignition Cover For Tenere

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€49.00 excl tax
Picture of HDPE Water Pump Cover For Tenere

HDPE Water Pump Cover For Tenere

Introducing Muller Motorsport's innovative HDPE clutch and stator covers, meticulously crafted to safeguard your beloved motorcycle from the rigors of adventure and unforeseen mishaps. Designed to be a practical and cost-effective solution, these covers seamlessly fit over your OEM engine side cases, eliminating the need for any complex removal or causing messy oil spills.
€39.00 excl tax